Silver Series LED Brake Light
Fits: 2010 - 2019 Super Duty
Super Duty Silver Series LED Brake Light
2017+ Sold as (4) Bulbs + (4) 50W 6 Ohm LED Load Resistors
Want the person behind you to notice your brake light or tailights? Then these are the bulbs for you! They are incredibly bright! These bulbs utilize 21 individual "2835" style SMD LED chips.
When you install LED bulbs to replace your factory blinkers/turn signal bulbs chances are you will experience a "hyperflash" inside the cabin/instrument panel as an indicator. This means the vehicle computer will think you have a burnt out bulb beacus LED bulbs run a lower voltage than halogen bulbs. By installing the included resistors, you will trick your vehicle's computer into thinking it has a good bulb installed and will blink normally. Install the resistor between the blinking positive wire and the ground wire. (In most applications it's the ouside wire in the socket. Example: If socket has 3 wires, tap the outside 2 wires, not the middle wire).
WARNING! Resistors do get hot! Make sure to mount the resistor to something metal behind the headlight/brake lights with self tapping screws. Do not use zip/cable ties. Resistors can melt other wiring that comes in contact with them.